☏ (07) 347 9363

Infill Spacers

Infill spacers fit between the guards and add stability to guard fittings, reduce spray and make for a classy finish. There are two options - the box or U shape and are manufactured ready for installation. Infill spacers are available in either aluminium or stainless and come in a range of spans and widths to suit your requirements. Sizing: Span - distance on the top of the infill spacer between the guards. Please note the distance along the bottom of the infill spacer is approximately 10mm shorter to ensure the spacers match the curve of the guards. Width - width of the spacer and usually matches the width of the guards.

Box - Aluminium 3mm Weld & Polish

Box - Aluminium 3mm Weld & Polish - Infill Spacers

Boxed spacers are flat on top with folds on three sides with the inside edge facing the chassis left open.  The folds on the widths are at 90 degrees to fit the bottom of the guard.  These top of the range spacers are expertly welded and polished to give the best finish.  To fit most guards in the Rhino range the standards width is 600mm and standard height is 40mm.  All measurements are in millimetres (mm). 

PART# SPAN WIDTH HEIGHT NOTES
IFB3ALW100600 100 600 40  
IFB3ALW110600 110 600 40  
IFB3ALW120600 120 600 40  
IFB3ALW130600 130 600 40  
IFB3ALW140600 140 600 40  
IFB3ALW150600 150 600 40  
IFB3ALW160600 160 600 40  
IFB3ALW170600 170 600 40  
IFB3ALW180600 180 600 40  
IFB3ALW190600 190 600 40  
IFB3ALW230600 230 600 40  
IFB3ALW240600 240 600 40  
IFB3ALW250600 250 600 40  
IFB3ALW260600 260 600 40  
IFB3ALW270600 270 600 40  
IFB3ALW330600 330 600 40  
IFB3ALW340600 340 600 40  
IFB3ALW350600 350 600 40  
IFB3ALW360600 360 600 40  
IFB3ALW370600 370 600 40  
IFB3ALW430600 430 600 40  
IFB3ALW440600 440 600 40  
IFB3ALW450600 450 600 40  
IFB3ALW460600 460 600 40  
IFB3ALW470600 470 600 40  
IFB3ALW480600        
IFB3ALW490600        
IFB3ALW500600        
IFB3ALW510600        
IFB3ALW520600        
IFB3ALW530600        
IFB3ALW540600        
IFB3ALW550600        
IFB3ALW560600        
IFB3ALW570600        
IFB3ALW580600        
IFB3ALW590600        
IFB3ALW600600        
Part numbers are in the format IFB3ALW######, e.g. 260 x 600 = IFB3AL260600
Standard material is 3mm, also available in 5mm.  Holes can be punched as additional service.  
Products dispatched with protective film except the edges which have been welded

Want something different?  We can manufacture to suit - please email us the material, span and width.     

 

Box - Aluminium

Box - Aluminium - Infill Spacers

Boxed spacers are flat on top with folds on three sides with the inside edge facing the chassis left open.  The folds on the widths are at 90 degrees to fit the bottom of the guard.  To fit most guards in the Rhino range the standards width is 600mm and standard height is 40mm.  All measurements are in millimetres (mm). 

PART# SPAN WIDTH HEIGHT NOTES
IFB3AL100600 100 600 40  
IFB3AL110600 110 600 40  
IFB3AL120600 120 600 40  
IFB3AL130600 130 600 40  
IFB3AL140600 140 600 40  
IFB3AL150600 150 600 40  
IFB3AL160600 160 600 40  
IFB3AL170600 170 600 40  
IFB3AL180600 180 600 40  
IFB3AL190600 190 600 40  
IFB3AL230600 230 600 40  
IFB3AL240600 240 600 40  
IFB3AL250600 250 600 40  
IFB3AL260600 260 600 40  
IFB3AL270600 270 600 40  
IFB3AL330600 330 600 40  
IFB3AL340600 340 600 40  
IFB3AL350600 350 600 40  
IFB3AL360600 360 600 40  
IFB3AL370600 370 600 40  
IFB3AL430600 430 600 40  
IFB3AL440600 440 600 40  
IFB3AL450600 450 600 40  
IFB3AL460600 460 600 40  
IFB3AL470600 470 600 40  
IFB3AL480600 480 600 40  
IFB3AL490600 490 600 40  
IFB3AL500600 500 600 40  
IFB3AL510600 510 600 40  
IFB3AL520600 520 600 40  
IFB3AL530600 530 600 40  
IFB3AL540600 540 600 40  
IFB3AL550600 550 600 40  
IFB3AL560600 560 600 40  
IFB3AL570600 570 600 40  
IFB3AL580600 580 600 40  
IFB3AL590600 590 600 40  
IFB3AL600600 600 600 40  
Part numbers are in the format IFB3AL######, e.g. 260 x 600 = IFB3AL260600
Standard material is 3mm, also available in 5mm.  Holes can be punched as additional service.  
Products dispatched with protective film

Want something different?  We can manufacture to suit - please email us the material, span and width.    

Box - Stainless Welded & Polished

Box - Stainless Welded & Polished - Infill Spacers

Boxed spacers are flat on top with folds on three sides with the inside edge facing the chassis left open.  The folds on the widths are at 90 degrees to fit the bottom of the guard.  These top of the range spacers are expertly welded and polished to give the best finish.  To fit most guards in the Rhino range the standards width is 600mm and standard height is 40mm.  All measurements are in millimetres (mm). 

PART# SPAN WIDTH HEIGHT NOTES
IFBSTW130600 100 600 40  
IFBSTW130600 110 600 40  
IFBSTW130600 120 600 40  
IFBSTW130600 130 600 40  
IFBSTW140600 140 600 40  
IFBSTW150600 150 600 40  
IFBSTW160600 160 600 40  
IFBSTW170600 170 600 40  
IFBSTW180600 180 600 40  
IFBSTW190600 190 600 40  
IFBSTW230600 230 600 40  
IFBSTW240600 240 600 40  
IFBSTW250600 250 600 40  
IFBSTW260600 260 600 40  
IFBSTW270600 270 600 40  
IFBSTW330600 330 600 40  
IFBSTW340600 340 600 40  
IFBSTW350600 350 600 40  
IFBSTW360600 360 600 40  
IFBSTW370600 370 600 40  
IFBSTW430600 430 600 40  
IFBSTW440600 440 600 40  
IFBSTW450600 450 600 40  
IFBSTW460600 460 600 40  
IFBSTW470600 470 600 40  
IFBSTW480600 480 600 40  
IFBSTW490600 490 600    
IFBSTW500600 500 600    
IFBSTW510600 510 600    
IFBSTW520600 520 600    
IFBSTW530600 530 600    
IFBSTW540600 540 600    
IFBSTW550600 550 600    
IFBSTW560600 560 600    
IFBSTW570600 570 600    
IFBSTW580600 580 600    
IFBSTW590600 590 600    
IFBSTW600600 600 600    
Part numbers are in the format IFBSTW######, e.g. 260 x 600 = IFBSTW260600
Standard material is 1.2mm.  Holes can be punched as additional service.  
Products dispatched with protective film except the edges which have been welded and polished

Want something different?  We can manufacture to suit - please email us the material, span and width. 

Box - Stainless

Box - Stainless - Infill Spacers

Boxed spacers are flat on top with folds on three sides with the inside edge facing the chassis left open.  The folds on the widths are at 90 degrees to fit the bottom of the guard.  To fit most guards in the Rhino range the standards width is 600mm and standard height is 40mm.  All measurements are in millimetres (mm). 

PART# SPAN WIDTH HEIGHT NOTES
IFBST100600 100 600 40  
IFBST110600 110 600 40  
IFBST120600 120 600 40  
IFBST130600 130 600 40  
IFBST140600 140 600 40  
IFBST150600 150 600 40  
IFBST160600 160 600 40  
IFBST170600 170 600 40  
IFBST180600 180 600 40  
IFBST190600 190 600 40  
IFBST230600 230 600 40  
IFBST240600 240 600 40  
IFBST250600 250 600 40  
IFBST260600 260 600 40  
IFBST270600 270 600 40  
IFBST330600 330 600 40  
IFBST340600 340 600 40  
IFBST350600 350 600 40  
IFBST360600 360 600 40  
IFBST370600 370 600 40  
IFBST430600 430 600 40  
IFBST440600 440 600 40  
IFBST450600 450 600 40  
IFBST460600 460 600 40  
IFBST470600 470 600 40  
IFBST480600 480 600 40  
IFBST490600 490 600 40  
IFBST500600 500 600 40  
IFBST510600 510 600 40  
IFBST520600 520 600 40  
IFBST530600 530 600 40  
IFBST540600 540 600 40  
IFBST550600 550 600 40  
IFBST560600 560 600 40  
IFBST570600 570 600 40  
IFBST580600 580 600 40  
IFBST590600 590 600 40  
IFBST600600 600 600 40  
Part numbers are in the format IFBST######, e.g. 260 x 600 = IFBST260600
Standard material is 1.2mm.  Holes can be punched as additional service.  
Products dispatched with protective film

Want something different?  We can manufacture to suit - please email us the material, span and width. 

U Shape - Aluminium

U Shape - Aluminium - Infill Spacers

U-shaped infill spacers are flat with a fold at each end to connect to the guards.  The folds on the widths are at 90 degrees to fit the bottom of the guard.  To fit most guards in the Rhino range the standards width is 600mm and standard height is 40mm.  All measurements are in millimetres (mm). 

PART# SPAN WIDTH HEIGHT NOTES
IFU3AL100600 100 600 40  
IFU3AL110600 110 600 40  
IFU3AL120600 120 600 40  
IFU3AL130600 130 600 40  
IFU3AL140600 140 600 40  
IFU3AL150600 150 600 40  
IFU3AL160600 160 600 40  
IFU3AL170600 170 600 40  
IFU3AL180600 180 600 40  
IFU3AL190600 190 600 40  
IFU3AL230600 230 600 40  
IFU3AL240600 240 600 40  
IFU3AL250600 250 600 40  
IFU3AL260600 260 600 40  
IFU3AL270600 270 600 40  
IFU3AL330600 330 600 40  
IFU3AL340600 340 600 40  
IFU3AL350600 350 600 40  
IFU3AL360600 360 600 40  
IFU3AL370600 370 600 40  
IFU3AL430600 430 600 40  
IFU3AL440600 440 600 40  
IFU3AL450600 450 600 40  
IFU3AL460600 460 600 40  
IFU3AL470600 470 600 40  
IFU3AL480600 480 600 40  
IFU3AL490600 490 600 40  
IFU3AL5000600 500 600 40  
IFU3AL510600 510 600 40  
IFU3AL520600 520 600 40  
IFU3AL530600 530 600 40  
IFU3AL540600 540 600 40  
IFU3AL550600 550 600 40  
IFU3AL560600 560 600 40  
IFU3AL570600 570 600 40  
IFU3AL580600 580 600 40  
IFU3AL590600 590 600 40  
IFU3AL600600 600 600 40  
Part numbers are in the format IFU3AL######, e.g. 260 x 600 = IFU3AL260600
Standard material is 3mm, also available in 5mm.  Holes can be punched as additional service.  
Products dispatched with protective film.  

Want something different?  We can manufacture to suit - please email us the material, span and width.   

 

U Shape - Stainless

U Shape - Stainless - Infill Spacers

U-shaped infill spacers are flat with a fold at each end to connect to the guards.  The folds on the widths are at 90 degrees to fit the bottom of the guard.  To fit most guards in the Rhino range the standards width is 600mm and standard height is 40mm.  All measurements are in millimetres (mm). 

PART# SPAN WIDTH HEIGHT NOTES
IFUST130600 100 600 40  
IFUST130600 110 600 40  
IFUST130600 120 600 40  
IFUST130600 130 600 40  
IFUST140600 140 600 40  
IFUST150600 150 600 40  
IFUST160600 160 600 40  
IFUST170600 170 600 40  
IFUST180600 180 600 40  
IFUST190600 190 600 40  
IFUST230600 230 600 40  
IFUST240600 240 600 40  
IFUST250600 250 600 40  
IFUST260600 260 600 40  
IFUST270600 270 600 40  
IFUST330600 330 600 40  
IFUST340600 340 600 40  
IFUST350600 350 600 40  
IFUST360600 360 600 40  
IFUST370600 370 600 40  
IFUST430600 430 600 40  
IFUST440600 440 600 40  
IFUST450600 450 600 40  
IFUST460600 460 600 40  
IFUST470600 470 600 40  
         
         
         
         
         
         
         
         
         
         
         
         
Part numbers are in the format IFUSTW######, e.g. 260 x 600 = IFUST260600
Standard material is 1.2mm.  Holes can be punched as additional service.  
Products dispatched with protective film 

Want something different?  We can manufacture to suit - please email us the material, span and width.