☏ (07) 347 9363

Infill Spacers - Stainless Box

Infill spacers fit between the guards and add stability to guard fittings, reduce spray and make for a classy finish. There are two options - the box or U shape and are manufactured ready for installation. Infill spacers are available in either aluminium or stainless and come in a range of spans and widths to suit your requirements. Sizing: Span - distance on the top of the infill spacer between the guards. Width - width of the spacer and closely matches the width of the guards.

Box - Stainless Welded & Polished OR No Weld

Box - Stainless Welded & Polished OR No Weld - Infill Spacers - Stainless Box

Boxed spacers are flat on top with folds on three sides with the inside edge facing the chassis left open.  The folds on the widths are at 90 degrees to fit the bottom of the guard.  These top of the range spacers are either expertly welded and polished to give the best finish or folded with no weld if you want to finish in your own style.  To fit most guards in the Rhino range the standards width is 600mm and standard height is 40mm.  All measurements are in millimetres (mm). 

STAINLESS WELD PART# (W) STAINLESS NO WELD PART # SPAN WIDTH HEIGHT NOTES
IFBSTW1060 IFBST1060 100 600 40  
IFBSTW1160 IFBST1160 110 600 40  
IFBSTW1260 IFBST1260 120 600 40  
IFBSTW1360 IFBST1360 130 600 40  
IFBSTW1460 IFBST1460 140 600 40  
IFBSTW1560 IFBST1560 150 600 40  
IFBSTW1660 IFBST1660 160 600 40  
IFBSTW1760 IFBST1760 170 600 40  
IFBSTW1860 IFBST1860 180 600 40  
IFBSTW1960 IFBST1960 190 600 40  
IFBSTW2060 IFBST2060 200 600 40  
IFBSTW2160 IFBST2160 210 600 40  
IFBSTW2260 IFBST2260 220 600 40  
IFBSTW2360 IFBST2360 230 600 40  
IFBSTW2460 IFBST2460 240 600 40  
IFBSTW2560 IFBST2560 250 600 40  
IFBSTW2660 IFBST2660 260 600 40  
IFBSTW2760 IFBST2760 270 600 40  
IFBSTW2860 IFBST2860 280 600 40  
IFBSTW2960 IFBST2960 290 600 40  
IFBSTW3060 IFBST3060 300 600 40  
IFBSTW3160 IFBST3160 310 600 40  
IFBSTW3260 IFBST3160 320 600 40  
IFBSTW3360 IFBST3360 330 600 40  
IFBSTW3460 IFBST3460 340 600 40  
IFBSTW3560 IFBST3560 350 600 40  
IFBSTW3660 IFBST3660 360 600 40  
IFBSTW3760 IFBST3760 370 600 40  
IFBSTW3860 IFBST3860 380 600 40  
IFBSTW3960 IFBST3960 390 600 40  
IFBSTW4060 IFBST4060 400 600 40  
IFBSTW4160 IFBST4160 410 600 40  
IFBSTW4260 IFBST4260 420 600 40  
IFBSTW4360 IFBST4360 430 600 40  
IFBSTW4460 IFBST4460 440 600 40  
IFBSTW4560 IFBST4560 450 600 40  
IFBSTW4660 IFBST4660 460 600 40  
IFBSTW4760 IFBST4760 470 600 40  
IFBSTW4860 IFBST4860 480 600 40  
IFBSTW4960 IFBST4960 490 600 40  
IFBSTW5060 IFBST5060 500 600 40  
IFBSTW5160 IFBST5160 510 600 40  
IFBSTW5260 IFBST5260 520 600 40  
IFBSTW5360 IFBST5360 530 600 40  
IFBSTW5460 IFBST5460 540 600 40  
IFBSTW5560 IFBST5560 550 600 40  
IFBSTW5660 IFBST5660 560 600 40  
IFBSTW5760 IFBST5760 570 600 40  
IFBSTW5860 IFBST5860 580 600 40  
IFBSTW5960 IFBST5960 590 600 40  
IFBSTW6060 IFBST6060 600 600 40  
WELD and POLISH part numbers are in the format IFBSTW######, e.g. 260 x 600 = IFBSTW260600
NO weld part numbers are in the format IFBST######, e.g. 260 x 600 = IFBST260600
Standard material is 1.2mm.  Holes can be punched as additional service.  
Products dispatched with protective film except the edges which have been welded and polished

Want something different?  We can manufacture to suit - please email us the material, span and width.