PART#: CAP50
Caps are a tight fit into the chassis end of the Rhino chassis pole.
Available in grey and black.
Stainless steel option also available
The caps have a small diameter of 51.8mm and the large diameter is 60mm.
Also available Part# CAP50Stainless fits Rhino steel chassis pole
PART#: CAP40
Plugs fit in the outer end of Rhino chassis poles.
Available in grey and black and stainless steel
The caps have a small diameter of 42.4mm and the large diameter is 48mm.
PART#: STCAP50
Plugs fit in the inner end of Rhino stainless steel chassis poles.The caps have a small diameter of 53.8mm and the large diameter is 60mm.Also available with 51.8 diameter to fit our standard steel poles.
PART#: STCAP40
Plugs fit in the outer end of Rhino stainless steel chassis poles.Also fits our standard steel chassis poles.The caps have a small diameter of 42.4mm and the large diameter is 48mm.
PART#: P40
Plugs fit in the outer end of Rhino chassis poles.
Available in a range of colours, white, red, light blue, medium blue, dark blue, green, black, yellow and grey. Rhino colour codes 05,50,325,326,370,208,70,117,814.
The caps have a small diameter of 41.9mm and the large diameter is 48.6mm.
PART#: SC
Caps are a tight fit into the Rhino plastic saddle
Available in a range of colours, red, light blue, medium blue, grey and black. Rhino colour codes 50,325,326,814,70.
The caps have a small diameter of 49.9mm and the large diameter is 55mm.
PART#: P50
Caps are a tight fit into the chassis end of the Rhino chassis pole.
Available in grey and black.
The caps have a small diameter of 52.8mm and the large diameter is 56mm.
PART#: R40
Plugs fit in the outer end of Rhino Chassis poles.
The caps have a small diameter of 41.8mm and the large diameter is 48mm. These plugs are made of polycarbonate.
PART#: LR40
Designed to mount the side marker light at the outer end of
the chassis pole. Multivolt and supplied with 1.5M of lead.
The caps have a small diameter of 41.8mm and the large diameter is 48mm.
An expanded foam section is supplied, it is pushed into the pole to support the weight of the wire joint bund.
PART#: PLCAP
Caps fit over the end of Rhino Chassis Poles.
Available only in white.
The caps have an internal diameter of 47mm and the outer diameter is 56mm